If you just want install on a empty device, without any personal data on any harddisk inside the device, go forward to step: Get Antergos.
If you have personal data on any installed devices it is strongly advised to backup your data on external media!
If you want to install a dualbooting system with another OS preinstalled on your device follow the Wiki here:
For all installation scenariosit it is necessary to inform yourself about the hardware installed into your device, and to investigate if problems can occur. In addition, you should deal with the already created partitions and the installed hard disks in the system in order to avoid the wrong disk / partition to delete.
Create USB boot media:
use dd to get the iso without a huzzle:
sudo dd bs=4M if=/path/to/antergos-x86_64.iso of=/dev/sdX status=progress && sync
onto a usb stick. (sdx have to replaced by the device name of your usb-stick, you can find out by the command fdisk -l) For more information read the wiki entry: create-a-working-live-usb
On Windows try etcher it is insane easy to use:
Attention: It is recommended to use this two ways to "burn" ISO to usb-stick! as most other tools will may do changes to the ISO that harm the bootup!
Bios or UEFI?
The ISO-Installer offers automatic boot options for both systems legacy Bios and up-to-date EFI/UEFI.
If you want to create a dual boot system together with a preinstalled windows OS read here first:
On a Bios system:
you can just fire your machine up and press [F12] to get the boot device menu, where you can choose the USB stick as boot device.
In this section i will only follow installation that will erase a a whole hard drive, manual partioning will be handled in another wiki entry!
Now you will get the boot menu screen and you can choose your language by pressing [F2], choose the one you want and press [enter].
From the boot menu choose Start Antergos Live simple pressing enter and the Live Iso Installer will boot to the Live Environment:
On the first screen you will see an overview of thinks that needed, plus information if any possible package issue:
If all is O.K. here next is to choose your language and keyboard settings:
Followed by Timezone, what was probably already recognized:
And there you are: Now you have to choose your DE (Desktop Environment)
Base: will install only Base System without any graphical Login or DE,
if you want to run a Server or to install an DE not aviable at the installer.
Cinnamon: Gnome 2 - forked from Gnome Shell
Deepin: Deepin Technology Co
GNOME: Gnome 3 aka Gnome-Shell
Mate: continuation of GNOME 2
OpenBox: extremely standards compliant WM
After making your choice you will be prompted to choose extra options you may need:
Per default you will have the common options aviable:
Advanced users can enable more options on the bottom of the slide, it is recommended to choose this ones with caution!
A list of all aviable options:
Will configure system to enable support to build packages from AUR PKGBUILD.
注: All AUR PKGBUILDS are only provided by users and also maintained by them, and not official supported in any way by Antergos and Archlinux itself! That mnean using them can cause issues and can harm your system, as some may install unusual stuff or needs to uninstall packages because they need other versions e.t.c.
Recommandation here is to only install from AUR if you realy need it, and uninstall if not needed anymore.
Take care to track changes on this PKGBUILDS at their comments on AUR page of the builds.
Bluetooth: enable bluetooth service with systemd at bootup, and install needed software.
Firefox: is a free and open-source web browser developed by the Mozilla Foundation
Flash: Adobe Flash Player is freeware software for using content created on the Adobe Flash platform.
LibreOffice: Free Office Suite, open-source and rich in features.
Printing: enables Cups service to run on bootup and install some software for most common printers
SSH: OpenSSH connectivity tool for remote login with the SSH protocol, enabled with systemd on bootup and install needed software.
注意: be carefull to choose what you realy need! (keep it simple dude!)
You will get some info about each selectable item, by holding your mouse over it (hoover Info):
Now it becomes dangerous! we will proceed with choosing the space to install the system:
The most easy scenario is to use a whole disk, and you do not have any personal data or another OS you will dualboot together with Antergos. Then you can choose: Erase disk and install Antergos and press the arrow to go forward.
If you need encryption to secure a mobile machine read here: Antergos WIKI encrypted OS (will follow)
Second option is that you want to install Antergos onto a second HD (disk) inside your system, and you have another OS onto the first disk, then you have to take care to choose the right disk on the next screen, and choose the right disk also for the bootloader:
After a warning message, you reach the user account settings:
We are ready! the last one is the installation summery
Installation will start and you can see the progress.
When ready a message will popup, and you can reboot to your Antergos installation.
As most EFI UEFI systems are very different in what you can change and how you setup anything it is hard to give the "ONE" trick here, but mainly what you need is to disable secure boot, because this is what make it possible to boot up the USB Installer and get into the installing Environment.
- disable secure boot into the firmware (EFI-BIOS)
- make sure if you where booting in UEFI/EFI mode and it is not so that may another OS is already installed in Legacy Bios/MBR mode!
On some of the fancy themed and overclocking Firmware setups you may find yourself lost on the options, try to get some info on the manufacturers handbook, or search the webside to get information on how to setup the firmware.
The procedure is almost the same as shown here for Bios-Systems but there are some differences.
EFI Boot menu:
As EFI-Systems do not make use of the MBR to boot the OS like it is done in Legacy Bios systems, it needs a EFI-Boot partition.
This is handled automatic if you choose to format drive automaticly, and so erase the complete drive to install Antergos.
If you want dualbooting with a Windows [tm] read this: https://antergos.com/wiki/install/how-to-dual-boot-antergos-windows-uefi-expanded-by-linuxhat/
If you want partition the disk on your own:
make sure to choose GPT as partition table:
You will need to create an EFI-Boot partition formatted as fat32, mounted on /boot/efi, as shown here:
Rest follow up as shown before for Bios system install.
Antergos Help Forum open minded newbie friendly community is waiting for your question!