On This Page...
- 1 What NOT To Do
- 2 Create Live USB From Linux
- 3 Create Live USB From Windows
- 4 Create Live USB From macOS (Mac OS X)
- 5 Contributors:
What NOT To Do
Some USB Writing utilities alter the labels of the partitions included in the ISO image. This causes the boot to fail. There are workarounds to fix the failure but that is beyond the scope of this article. For best results, it is recommended that you NOT use these types of utilities to create your Live USB. Some of the more widely known utilities that fall into this category are:
- Linux Live USB Creator
- Universal USB Installer
- Live USB Creator
Create Live USB From Linux
There are many methods of creating Live USB images using Linux. We are going to focus on only the two recommended methods which are dd from the command line and SUSE Image Writer from the GUI.
The dd command will almost always result in a working Live USB. Just change the paths to the correct paths for your system.
NOTE: The USB drive is specified as /dev/sdx and not /dev/sdxX. The most common path of a USB drive is /dev/sdb BUT yours might be different depending on your system.
To view a list of all drives currently attached to your system run this command:
sudo fdisk -l
To write the Live Install image to your USB run the following command:
sudo dd bs=4M if=/path/to/antergos-x86_64.iso of=/dev/sdX && sync
NOTE: The dd command does not offer a progress bar by default so you will only see a flashing cursor while it's working. Once it's complete it will show a summary of the task. The amount of time it takes to write the image will vary depending on image size and your system specs.
If you realy want to see the progress use dd with the option "status=progress"
sudo dd bs=4M if=/path/to/antergos-x86_64.iso of=/dev/sdX status=progress && sync
And voila! dd will show a output.
Suse Image Writer is easy to use and works great. Download and install it via the appropriate method for your system.
Create Live USB From Windows
USBWriter is a free USB image writer that supports .iso files (which Antergos uses) with ease. Just head to the Source Forge link below and download the program, "browse" to the .iso image of Antergos, select the target USB drive and click the "Write" button and it will properly format the drive and write the image.
Video Tutorial on Rufus: Rufus Video Link
Create Live USB From macOS (Mac OS X)
On macOS you can use either the command line option like on Linux or a GUI.
The procedure is the same explained for Linux using dd, with two differences:
- The drivers as identified as /dev/diskX not as /dev/sdX; and
- The command to list the drivers is diskutil list.
It means the commands to be used are:
sudo dd bs=4M if=/path/to/antergos-x86_64.iso of=/dev/diskX && sync
The first part of this article explains how to create the Live USB using macOS disk utility.
Or you can download Etcher and have fun!
Bonus: Etcher also works on Linux and Windows.